Technical FAQs

Ask a Question

What is the main Functions of Acti 9 Smartlink ?

The Acti 9 Smartlink transmits data from Acti 9 devices to a PLC or a supervision system via the Modbus serial line communication network.

Function :
Data transmission between the Modbus network and Acti 9 devices
  • Circuit breakers, residual current circuit breakers, residual current devices:
    • open/closed state
    • tripped state
    • number of opening/closing cycles
    • number of tripping actions.
  • Contactors, impulse relays:
    • opening control
    • closing control
    • open/closed state
    • number of cycles
    • total period of operation of the load (device closed).
  • Remote controlled circuit breaker/Reflex iC60:
    • opening control
    • closing control
    • open/closed state
    • tripped state
    • number of cycles
    • total period of operation of the load.
  • Power meters:
    • number of pulses recorded
    • pulse value setting (e.g. kWh)
    • total consumption recorded
    • estimate of power consumption.
All the data are stored in memory: number of cycles, consumption, period of operation, even in the event of a power failure.
The Acti 9 Smartlink can also exchange data with any device having 24 V DC digital inputs/outputs.
No configuration of the connected products is required.
When the Acti 9 Smartlink is switched on, communication automatically adjusts to the Modbus Master (PLC, control station) communication parameters.
Was this helpful?
What can we do to improve the information ?