Technical FAQs

Ask a Question

Can the OA1 output of Tesys U be used with multi function unit to drive a separate motor contactor.
Output OA1 for Tesys U with base contactor (LUB**) is only used to drive the contactor embedded inside the TesysU contactor base LUB.   In order to use...
How to configure and setup Scada Pack E - series RTU over Modbus TCP?
Follow steps as below :- -  Configure scadapack RTU from E-configurator with settings as shown .    Configure some analog points like derived point...
How to Configure Logins and Passwords for FDM128?
The predefined default user login/password combinations are:  For the administrator: admin/admin  For the operator: oper/oper If you need to change...
What is the new tag point count licensing in Citect SCADA V7.0 ?
In CitectSCADA 6.10 or earlier, multiple tags that share the same I/O device address will be counted as a single I/O point. This is calculated at...
How to reset Trio radio like J series to factory default incase IP address or other settings are unknown ?
If the radio settings become unknown then a factory reset is required. A factory default can be initiated by applying DC power to the radio (wait...
What is the Mean time between failures (MTBF) for 140CPU67861 in hours ?
The MTBF figures in hours at different temperature and continuous operation are as follows: 140CPU67861                    Mtbf 30° Continuous operation...
How can I save the public variables of a DFB with PL7-PRO?
The public variables of a DFB can be modified by program or with animation tables. When reloading programs, these public variables return to the initialization...
How to configure and setup Scada Pack E - series RTU over Modbus TCP?
Follow steps as below :- -  Configure scadapack RTU from E-configurator with settings as shown .    Configure some analog points like:  Derived point...
How can I save the public variables of a DFB with PL7-PRO?
The public variables of a DFB can be modified by program or with animation tables. When reloading programs, these public variables return to the initialization...
Results 41 - 50 of 100