Technical FAQs

Ask a Question

What is the new tag point count licensing in Citect SCADA V7.0 ?
In CitectSCADA 6.10 or earlier, multiple tags that share the same I/O device address will be counted as a single I/O point. This is calculated at...
How to reset Trio radio like J series to factory default incase IP address or other settings are unknown ?
If the radio settings become unknown then a factory reset is required. A factory default can be initiated by applying DC power to the radio (wait...
What is the Mean time between failures (MTBF) for 140CPU67861 in hours ?
The MTBF figures in hours at different temperature and continuous operation are as follows: 140CPU67861                    Mtbf 30° Continuous operation...
How can I save the public variables of a DFB with PL7-PRO?
The public variables of a DFB can be modified by program or with animation tables. When reloading programs, these public variables return to the initialization...
How to configure and setup Scada Pack E - series RTU over Modbus TCP?
Follow steps as below :- -  Configure scadapack RTU from E-configurator with settings as shown .    Configure some analog points like:  Derived point...
How can I save the public variables of a DFB with PL7-PRO?
The public variables of a DFB can be modified by program or with animation tables. When reloading programs, these public variables return to the initialization...
Is it possible to use Altivar 71 Drive for control of the Synchronous Motor.
Yes, Altivar 71 Drive can be used for control of the Synchronous Motor.  Note:   1. The Drive should be programmed for Open-Loop Control.   2. De-rate...
How to fine tune OPC factory server communication parameters ?
Check attached manual to fine tune  OPC factory server communication parameters ?
Where I can find PLC USB Driver Suite version 14.12 (3.15 IE25) for Unity Pro 13 ?
PLC USB Driver Suite version 14.12 (3.15 IE25)  for Unity Pro 13 is available for download at below link. https://schneider-electric.box.com/s/2g6x5er43rxdalczqc3uqhvt52rueku7...
What is the compatibility matrix of CitectScada 2018 with different operating system ?
Check the attached compatibility matrix of Citect SCADA 2018.
Results 51 - 60 of 100