Technical FAQs

Ask a Question

Do Unity Pro and Unity Application Generator (UAG) have separate licenses.
Yes, Unity Pro and UAG have separate licenses.   During installation of UAG, it detects the existing Unity Pro versions on your PC/Laptop and it will...
What is the execution time and memory consumption of the PIDFF instruction in Unity Pro Quantum platform.
It has been observed that the maximum time taken for executing PIDFF instruction is around 50 microseconds on Unity Pro Quantum platform.   Regarding...
What is the meaning of fault code 151 in XXMIT block in Unity Pro.
The fault code 151 means that MsgOut is smaller than 12 Byte when 'Modbus Master Messaging' function is selected. To prevent this fault do the following:...
What is the insulation voltage rating for cables BMX FTW and BMX FCW in Modicon M340 range.
The dielectric withstanding (VDC) for cables BMX FTW and BMX FCW is 1000 Volts applied for 1 minute and th minimum specific insulation resistance...
How to get logarithm of base 10 value in Vijeo Designer software.
Only natural logarithm(of base e) is available under Math package of standard Java package version associated with Vijeo Designer software. A workaround...
How to switch panels based on time in Magelis XBT G/GT terminals automatically.
In order to switch panel automatically based on time a script has to be written during the application development stage. Below is the sample script:...
What is part reference for the Modbus to DeviceNet Gateway for the Altistart 48 Soft Starter.
The part reference for Modbus to DeviceNet gateway for the Altistart is LUFP9.  Refer attachment for the installation, configuration and programming...
What is the minimum rating of the Motor that can be used with the Altivar 31/61/71 Range of Drives.
The motor current should not be less than 0.2 times the nominal Drive current when the motor is driven by Altivar 31/61/71 Drives, for thermal protection....
Why ports are not available for selection inside E-configurator modbus master scanner or How to setup modbus master scanner with modbus slave device with scadapack RTU ?
Yes its observed that when ports 1 or port 2 is to be selected inside modbus scanner of e-configurator through "ADD DEVICE"  button  Port selection...
What is the difference between 31088 and 31097 key locking devices.
31097 key locking device is used for the Single Handle Source Changeover Assembly in which different type off cam is used. These cams are to be ordered...
Results 91 - 100 of 100