red Ø30 Emergency stop pushbutton head Ø16 trigger and latching turn releaseShow more characteristics >
Main range of productHarmony XB6 product or component typeHead for emergency stop push-button device short nameZB6 bezel materialPlastic mounting diameter16 mm sale per indivisible quantity1 shape of signaling unit headRound type of operatorTrigger action and mechanical latching resetTurn to release operator profileRed mushroom Ø 30 mm unmarked Complementary CAD overall width30 mm CAD overall height30 mm CAD overall depth50 mm product weight0.035 kg mechanical durability100000 cycles Environment protective treatmentTC ambient air temperature for storage-40...70 °C ambient air temperature for operation-25...70 °C electrical shock protection classClass II conforming to IEC 61140 IP degree of protectionIP65 conforming to IEC 60529 NEMA degree of protectionNEMA 4 conforming to CSA C22.2 No 94NEMA 13 conforming to CSA C22.2 No 94NEMA 4X conforming to CSA C22.2 No 94NEMA 13 conforming to UL 50NEMA 4 conforming to UL 50NEMA 4X conforming to UL 50 standardsEN/IEC 60204-1EN/IEC 60947-1EN/IEC 60947-5-1EN/IEC 60947-5-5EN/ISO 13850JIS C 4520JIS C 852UL 508CSA C22.2 No 14 product certificationsCCCCSAGOSTUL vibration resistance+/- 3 mm (f = 2...500 Hz) conforming to IEC 60068-2-65 gn (f = 2...500 Hz) conforming to IEC 60068-2-6 shock resistance30 gn 18 ms half sine wave acceleration IEC 60068-2-2750 gn 11 ms half sine wave acceleration IEC 60068-2-27 Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CertificateSizeAdd to My Documents
No results foundUnfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsHead for Mushroom Head Pushbutton, Trigger ActionDimensions
Mounting and ClearancePanel Cut-outFor Square or Circular HeadPushbuttons, Switches and Pilot Lights for Printed Circuit Board ConnectionFront Panel Cut-out (Viewed from Installer’s Side)Printed Circuit Board Drillings (Viewed from Electrical Block Side)A24 mm/0.94 in. minimum for rectangular heads, 18 mm/0.71 in. minimum for square or circular headsB18 mm/0.71 in. minimum(1)6 x Ø 1.1 mm / 6 x Ø 0.04 in. holes.(2)1 x Ø 2.60-0.2 mm / 1 x Ø 0.100--0.008 in. hole for locating pin, only when using socket adaptor ZB6Y010.(3)1 x Ø 3.20-0.2 mm / 1 x Ø 0.130-0.008 in. hole for fixing of printed circuit board onto the front panel using body bracket ZB6Y011. This hole must be drilled on the left-hand side, when heads are positioned at the normal angle. Fit a body bracket ZB6Y011 every 72 mm/2.83 in. maximum for cut-outs on 24 mm/0.94 in. centres (rectangular heads) and 54 mm/2.13 in. maximum for cut-outs on 18 mm/0.71 in. centres (square or circular heads).
General tolerances of the panel and printed circuit board: T1, T2: T1 + T2 = 0.3 mm/0.01 in. maximum.
Thickness of printed circuit board: 1.6 mm/0.06 in. minimum.Mounting with Body Bracket
With socket adaptor ZB6Y010(1)Head(2)Nut(3)Body(4)Body bracket(5)Contact block(6)Socket adaptor(7)Panel(8)Printed circuit
Direct mounting without socket adaptor ZB6Y010(1)Head(2)Nut(3)Body(4)Body bracket(5)Contact block(6)Panel(7)Printed circuit